linear led strip on fexible print - ed circuit board with self-adhe - sive back for easy installation! contour confgurations and three dimensional assembly possible. osram power topled ? delivers high luminous fux size of entire module (lxwxh) 27.5ft x 0.4 in. x 0.12 in. conveniently feld cut with scis - sors (smallest unitC10leds/5.5") ? ? ? ? ? long life: up to 100,000 hours depending on color. white mod - ules service life is up to 50,000 hours when tc point is main - tained at or below 40c. available in various colors: red, true green, blue, yellow and white optimal operation with opto - tronic 24vdc power supplies 120 beam angle minimal heat generation ? ? ? ? ? linearlight flex modules pair the diminutive size of leds with a fexible printed circuit board to achieve a high degree of confgura - tion. these modules are ideally suited to match simple contours and complex three dimensional assembly requirements. these modules are ideal for edge lighting transparent and diffuse materials. they are mounted on self-adhesive tape and can be conveniently feld-cut. linearlight flex topled is optimally paired with optotronic ? 24vdc power supplies. ordering description wattage (w) color lnrflxtp/lm10a/w3f-727 27.5 ft 86.4 2700k lnrflxtp/lm10a/w2-847 27.5 ft 86.4 4700k lnrflxtp/lm10a/w3f-854 27.5 ft 86.4 5400k lnrflxtp/lm10a/w2-854 27.5 ft 86.4 5400k lnrflxtp/lm10a/w2-865 27.5 ft 86.4 6500k lnrflxtp/617/lm10a/a1 27.5 ft 72 amber red lnrflxtp/587/lm10a/y1 27.5 ft 72 yellow lnrflxtp/525/lm10a/t1 27.5 ft 72 true green lnrflxtp/470/lm10a/b1 27.5 ft 72 blue applications cove lighting edge lighting transparent/diffuse materials border lighting commercial signs emergency/rescue signs path and contour marking backlighting complex contours refrigeration cases display shelves recessed lighting application information linearlight flex topled ? flexible white or colored led strips www.sylvania.com key features & benefts product offering led011r7 5/08
power supply information ordering information linearlight flex topled / 617 / a module name wavelength color code a = amber red, y = yellow, t = true green, b = blue ordering guide optotronic ? 6w optotronic 20w optotronic 75w optotronic 96w optotronic 240w (51501) (51512) (51513, 51514) (51511, 51599) (51515) led item no. of max. no. of max. no. of reels max. no. of reels max. no. of reels max. number color coupons* length (ft) coupons* length (ft) (coupons)*** length (ft)** (coupons) length (ft) (coupons) length (ft) 70266 white 4 1.8 13 6.0 0.9 (52) 23.9 1.1 (66) 30.25 0.9 (55) 3x 25.21 70105 white 4 1.8 13 6.0 0.9 (52) 23.9 1.1 (66) 30.25 0.9 (55) 3x 25.21 70291 white 4 1.8 13 6.0 0.9 (52) 23.9 1.1 (66) 30.25 0.9 (55) 3x 25.21 70089 white 4 1.8 13 6.0 0.9 (52) 23.9 1.1 (66) 30.25 0.9 (55) 3x 25.21 70104 white 4 1.8 13 6.0 0.9 (52) 23.9 1.1 (66) 30.25 0.9 (55) 3x 25.21 70135 amber red 5 2.3 16 7.3 1 27.5 1.3 (80) 36.66 1.1 (66) 3x 30.25 70061 yellow 5 2.3 16 7.3 1 27.5 1.3 (80) 36.66 1.1 (66) 3x 30.25 70063 true green 5 2.3 16 7.3 1 27.5 1.3 (80) 36.66 1.1 (66) 3x 30.25 70064 blue 5 2.3 16 7.3 1 27.5 1.3 (80) 36.66 1.1 (66) 3x 30.25 * a coupon is a sub-section of 10 linearlight flex topleds with a length of 5.5. ** maximum length that can be powered from one end is 13.8 ft. to power entire length of 1 reel connect power feed to the center or to both ends of the reel. *** for dimming linearlight flex topleds with ot dim or ot rgb 1ch dim, allow for an additional power consumption of 3 watts for a 70 watt led load. packaging notes C order quantity / dimensions: 1 reel / 7.5 x 7.25 x 1.1 minimum and maximum ratings parameter symbol values operating temperature at tc point t op -30... +75c (-22 to +167f) storage temperature t stg -40... +85c (-22 to +185f) voltage range v max 23...25 maximum reverse voltage v r 25 v (ov for 70266 and 70291) notes: 1. exceeding maximum ratings may damage the led module and cause potential safety hazards. 2. elevated operating temperatures can be expected to negatively impact the service life in terms of lumen output. catalog # type project comments prepared by date specifcation data item ordering module no. of power voltage current per color** initial lumens number abbreviation length (ft) leds (w) (vdc) module (a) (wavelength) per module (lm)* lumens/ft watts/ft 70266 lnrflxtp/lm10a/w3f-727 27.5 ft 27.5 600 86.4 24 3.6 2700k 1720 63 3 70105 lnrflxtp/lm10a/w2-847 27.5 ft 27.5 600 86.4 24 3.6 4700k 1290 47 3 70291 lnrflxtp/lm10a/w3f-854 27.5 ft 27.5 600 86.4 24 3.6 5400k 2000 73 3 70089 lnrflxtp/lm10a/w2-854 27.5 ft 27.5 600 86.4 24 3.6 5400k 1290 47 3 70104 lnrflxtp/lm10a/w2-865 27.5 ft 27.5 600 86.4 24 3.6 6500k 1290 47 3 70135 lnrflxtp/617/lm10a/a1 27.5 ft 27.5 600 72 24 3 617 nm 1620 59 2.6 70061 lnrflxtp/587/lm10a/y1 27.5 ft 27.5 600 72 24 3 587 nm 1290 47 2.6 70063 lnrflxtp/525/lm10a/t1 27.5 ft 27.5 600 72 24 3 525 nm 1200 44 2.6 70064 lnrflxtp/470/lm10a/b1 27.5 ft 27.5 600 72 24 3 469 nm 170 6 2.6 * all data is related to entire module measured at tc point of 25c. data refects statistical mean values. actual data may differ depending on variances in the manufacturing process. end users need to take into account the lumen depreciation as the temperature rises with various thermal management solutions installed . ** cri >70 for all 3300k. all other white color temperatures have a cri >80.
safety information warning: only qualified personnel should perform installation. to avoid electrical shock or component damage, disconnect power before attempting installation of the power supplies and/or modules. failure to install the power supplies and/or led modules in accordance with the national electric code (nec), all applicable federal, state and local electric codes as well as the specific underwriters laboratories (ul) safety standards for the installation, location and application may cause serious personal injury, death, property damage and/or product malfunction. these instructions are guidelines for installation of sylvania led modules and power supplies. installation requirements may vary depending on the application. licensed electricians should provide all installation services for connection of both primary and secondary (input/output) of the power supplies. item number ordering description length (in.) width (in.) wire length (in.) 70269 lm2pinflexconn 0.48 0.65 19.69 70263 lm2conn5flexconnbb 1.4 0.65 0.39 71236 linearlight track 1.6p 18 C 71237 linearlight track 4.6p 56 C 71238 linearlight track 1.6d 18 C 71239 linearlight track 4.6d 56 C accessories wiring diagram assembly diagram
osram sylvania national customer service and sales center 18725 n. union street westfeld, in 46074 usa industrial commercial phone: 1-800-255-5042 fax: 1-800-255-5043 national accounts phone: 1-800-562-4671 fax: 1-800-562-4674 oem/special markets phone: 1-800-762-7191 fax: 1-800-762-7192 display/optic phone: 1-888-677-2627 fax: 1-800-762-7192 in canada osram sylvania ltd headquarters 2001 drew road mississauga, on l5s 1s4 industrial commercial phone: 1-800-263-2852 fax: 1-800-667-6772 special markets phone: 1-800-265-2852 fax: 1-800-667-6772 visit our website: www.sylvania.com ? 2008 osram sylvania 5/08 photography assembly information 1. solder connections should only be performed on designated solder pads (marked 24v +/-). during solder - ing, do not exceed the maximum soldering time of 10 seconds and the maximum soldering temperature of 260c. 2. the smallest unit (5.5 C 10 leds) can be removed by cutting with scissors between the designated solder pads. 3. the mounting of the module is facilitated by means of the double-sided adhesive on the back-surface of the module. care must be taken to provide a clean and dry mounting surface, free of oils or silicone coatings as well as dirt particles. the mounting substrate must have sufficient structural integrity. take care to com - pletely remove the adhesive backing. once the module is appropriately positioned, press on the module with about 20n/cm 2 (refer to application techniques of 3m adhesive transfer tapes). 4. the minimum bending radius is 2 cm. the module may be bent over a smaller radius but only in regions of the circuit board containing no electronic components. such bends should be made only once and fixed in position to avoid cyclic fatigue. 5. the thermal expansion coefficient along the length of the module is 17 x 10^-6cm/cm/k. when installing in environments with large variations in temperature (e.g. outdoor applications) and operating length of more than 2m, the use of metallic mounting surfaces is necessary. otherwise it is advisable to use an additional thicker adhesive tape to absorb the stress of any mismatch in expansion coefficients. sylvania is a registered trademark of osram sylvania inc. osram and optotronic are registered trademarks of osram gmbh. topled is a registered trademark of siemens aktiengesellschaft corporation. specifcations subject to change without notice. the led module incorporates no protection against short circuits, overload or overheating. therefore it is nec - essary to operate the modules with an electronically stabilized power supply offering protection against the above mentioned safety risks. osram optotronic power supplies are specifically designed with protection features for safe operation. when using power supplies other than optotronic the following basic safety features should be verified in addition to any other application specific concerns and local safety codes: ? short circuit protection ? overload protection ? overheat protection ? correct output voltage, including consideration for ripple and spikes. 1. the led module itself and all its components may not be mechanically stressed. 2. assembly must not damage or destroy conducting paths on the circuit board. 3. correct electrical polarity needs to be observed. wrong polarity will result in no light emission and may destroy the module. 4. please ensure that the power supply is of adequate power rating to operate the total load. follow appropriate nec requirements. 5. when mounting on metallic or otherwise conductive surfaces, an electrical isolation is required at soldering points between the module and the mounting surface. 6. pay attention to standard electrostatic discharge (esd) precautions when installing the module. 7. the module, as manufactured, has no conformal coating and therefore offers no inherent protection against corrosion. it is recommended that the user complete all module modifications first (cutting, wiring) and then apply a conformal coating in the final stages of installation. 8. damage by corrosion will not be honored as a materials defect claim. it is the users responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements. 9. for application involving exposure to humidity and dust the module must be protected by a fixture or housing with a suitable protection glass. the module can be protected against condensation water by treatment with an appropriate circuit board grade conformal coating. the lacquer apl of the company electrolube http://www. electrolube.com has met the conditions for linearlight in our tests. safety information (continued)
|
